vvabskugga.png

www.rotabest.com

alfraskugga.png
start.gif kampanjer.gif kataloger.gif tabelltabeller.gif omoss.gif

kontakt.gif

TML hårdmetallsågar med hårdmetalltänder - MBS-PRO

halsag_mbs-pro_spraengskiss.png halsagar_MBS-pro.png

MBS-Multirange Hole Saws for universal use. Max. cutting depth 20 mm (25/32")

Suitable for flat materials but also for pipes and curved surfaces.

Cutting of overlapping holes is possible. CAD optimized precision tools with high cutting performance and durability.

For use on stationary and portable drilling machines

(recommended up to max. Ø 40 mm; 1-9/16")

■■ Portable drilling Machines: up to 6 mm (15/64") material thickness

■■ Stationary drilling Machines: up to 20 mm (25/32”) material thickness at cutting depths from 6 mm (15/64")

we recommend clearing the chips.

MBS hole saws can be resharpened, and it is possible to replace broken out teeth depending on the condition of the hole saw.

Advantages: All Alfra TCT Hole Saws MBS-Pro type are equipped with an ejector spring. The cut material is self-ejecting.

Recommendation:

Use exchangeable Morse Taper arbor

MT2, MT3 or 13 mm straight shank

from Ø 31 mm (1-7/32") for stability

reasons.


Another special technical feature:

Another special technical feature:

From Ø 31 mm (1-7/32"), we use specially hardened tool holders to compensate for the torsional power in case of heavy operation, which avoids early shearing off of the tool holder shank.

In terms of construction not comparable with any other make.



MBS - för näst intill gränslös användning:


e.g on Rotabest Magnetborrmaskin med MT2 eller MT3-kona och Weldon. Artikelnr 060WD på maskiner med Weldon-fäste

mbs_bro2.png

storlekstabell_tct_mbs-pro.jpg

Storlekstabeller TCT MBS- PRO






    


Gamla Tingstadsgatan 30 l  422 44 Hisings-Backa l Tel: +46 31 51 90 30, Fax: +46 31 51 15 10 l  info@rotabest.com