vvabskugga.png

www.rotabest.com

alfraskugga.png
start.gif kampanjer.gif kataloger.gif tabelltabeller.gif omoss.gif

kontakt.gif

TML hårdmetallsågar med hårdmetalltänder - MBS-LIGHT

halsag_mbs_spraengskiss.png

halsagar_MBS-light.png

This TCT Hole Saw is a multi-range Hole Saw for the universal use up to a material thickness of max. 10 mm (3/8") (without ejector spring).

Through its solid construction and an enhanced cutting geometry (Registered Utility

Model No. 202 03 232 9), an improved cutting behaviour combined with a high cutting capacity and tool life, is achieved.

For the use on flat steel, as well as on pipes and vaulted materials.

Cutting of overlapping holes is possible.

For use on stationary and hand drilling machines (recommended up to max. Ø 40 mm; 1-9/16").

■■ Portable drilling Machines: up to 4 mm (1/8") material thickness

■■ Stationary drilling Machines: up to 10 mm (3/8") material thickness (for material thickness over 6 mm (15/64"), it is necessary to settle and empty the chips several times).

In case of heavy operation, we recommend Morse Taper Tool Holders, which are suitable from Ø 37 mm (1-7/16").

Advantage: All MBS-Light type TCT Hole Saws are equipped with an ejector spring. The cut material is self-ejecting.


Another special technical feature:

From Ø 37 mm (1-7/16"), specially hardened tool holders are used to compensate for the torsional power in case of heavy operation which avoids early shearing off of the tool holder shank.

In terms of construction not comparable with any other make.



MBS - för näst intill gränslös användning:

mbsfigur.jpg

storlekstabell_tct_mbs-light.jpg

Storlekstabeller TCT hålsågar MBS- LIGHT






    


Gamla Tingstadsgatan 30 l  422 44 Hisings-Backa l Tel: +46 31 51 90 30, Fax: +46 31 51 15 10 l  info@rotabest.com